Home
Checking the Print Head Nozzles

Using the Nozzle Check utility for Windows
Using the Nozzle Check utility for Mac OS X
Using the printer buttons

If you find that the printout is unexpectedly faint or that dots are missing, you may be able to identify the problem by checking the print head nozzles.

You can check the print head nozzles from your computer by using the Nozzle Check utility or from the printer by using the buttons.

Using the Nozzle Check utility for Windows

Follow the steps below to use the Nozzle Check utility.

Make sure that no error light is flashing or on.

Make sure that A4 size paper is loaded in the sheet feeder.

Right-click the printer icon on the taskbar, then select Nozzle Check.

    If the printer icon does not appear, refer to the following section to add the icon.

Follow the on-screen instructions.

Top
Using the Nozzle Check utility for Mac OS X

Follow the steps below to use the Nozzle Check utility.

Make sure that no error light is flashing or on.

Make sure that A4 paper is loaded in the sheet feeder.

Access the EPSON Printer Utility 2 dialog box.

Click the Nozzle Check button in the Utility dialog box.

Follow the on-screen instructions.

Top
Using the printer buttons

Follow the steps below to check the print head nozzles using the printer buttons.

Turn off the printer.

Make sure that A4 size paper is loaded in the sheet feeder.

Hold down the maintenance button and press the  power button to turn on the printer.

Release only the  power button when the printer turns on. When the nozzle check starts, release the maintenance button.

    Below are two sample nozzle check patterns.

    Compare the quality of the printed check page with the sample shown below. If there are no print quality problems, such as gaps or missing segments in the test lines, the print head is fine.

    If any segment of the printed lines is missing, as shown below, this could mean a clogged ink nozzle or a misaligned print head.

Top