Photo Print Software Setup

Index Search Contents Help

Note when Printing with EPSON PhotoQuicker

Note when Printing with EPSON PhotoQuicker

Although EPSON PhotoQuicker supports both PRINT Image Matching and Exif Print automatic print optimization technology, this printer supports only Exif Print. Therefore, even if your photo contains PRINT Image Matching information, you should not use PhotoQuicker settings that are made specifically for PRINT Image Matching.

To print, follow the steps below.

After loading your photos, select the photo you want to print.

Look at the File Info box on the right side of the EPSON PhotoQuicker window.

If both the PRINT Image Matching logo and the Exif Print logo are displayed at the bottom of the File Info box, click Edit Photo, then change the Automatic Correction setting to Exif Print, PhotoEnhance, or None. Click Apply, then click Close.

If the PRINT Image Matching logo is displayed at the bottom of the File Info box, click Edit Photo, then change the Automatic Correction setting to PhotoEnhance or None. Click Apply, then click Close.

If the Exif Print logo is displayed at the bottom of the File Info box, click Edit Photo, then select Exif Print, PhotoEnhance, or None as the Automatic Correction setting. Click Apply, if it is available, then click Close.

If neither logo is displayed at the bottom of the File Info box, click Edit Photo, then select PhotoEnhance or None as the Automatic Correction setting. Click Apply, if it is available, then click Close.

Make other necessary settings before you print. For details, click Help in EPSON PhotoQuicker.

[Top]