 |
 Memory card slots
Photo Cartridge
Mechanical
Electrical
Environmental
Standards and approvals
USB Interface
External storage devices
|
Compatible memory cards
|
CompactFlash
Memory Stick*
Memory Stick PRO
Memory Stick Duo**
Memory Stick PRO Duo**
MagicGate Memory Stick*
MagicGate Memory Stick Duo**
Microdrive
SDHC Memory Card
SD Memory Card
miniSDHC card**
miniSD card**
microSDHC card**
microSD card**
MultiMediaCard
xD-Picture Card
xD-Picture Card Type M
xD-Picture Card Type H
|
|
Voltage Requirements
|
3.3 v
3.3 V/5 V Combined use
Maximum current is 500 mA
|
* Maximum capacity is 128 MB.
** Adapter required.
 |
Note: |
|
|
For the latest information on memory cards available for you printer, contact your dealer or regional Epson sales office.
|
|
Memory card slot compatibility:
|
CF Type II card slot
|
Compatible with CF+ and CompactFlash Specification 1.4 cards
|
|
Memory Stick/MemoryStick PRO card slot
|
Compatible with Memory Stick Standard version 1.3 or Memory Stick Standard Memory Stick PRO Format Specifications version 1.0 cards
|
|
SD/MMC card slot
|
Compatible with SD Memory Card Specifications / PART1. Physical Layer Specification Version 2.00 cards and MultiMediaCard Standard cards
|
|
xD-Picture card slot
|
Compatible with xD-Picture Card™ Card Specification Version 1.20 Type M cards / Type H cards
|
|
Ink Color
|
Black. Cyan, Magenta and Yellow
|
|
Cartridge life
|
Within 6 months of opening the package, at 25 ˚C (77 ˚F)
|
|
Temperature
|
Storage:
-30 to 40 ˚C (-22 to 104 ˚F)
1 month at 40 ˚C (104 ˚F)
Freezing:*
-15 ˚C (5 ˚F)
|
* Ink thaws and is usable after approximately 3 hours at 25 ˚C (77 ˚F).
 |
Caution: |
|
-
Epson recommends the use of genuine Epson photo cartridges. Other products not manufactured by Epson may cause damage that is not covered by Epson’s warranties, and under certain circumstances, may cause erratic printer behavior.
-
Do not refill the photo cartridge. The printer calculates the amount of ink remaining using an IC chip on the photo cartridge, so even if the cartridge is refilled, the IC chip will report that it is empty.
|
|
|
Note: |
|
-
The photo cartridge packaged with your printer is partly used during initial setup. In order to produce high quality printouts, the print head in your printer will be fully charged with ink. This one-off process consumes a quantity of ink and subsequent cartridges set will last for their full rated life.
|
|
|
Dimensions
|
Storage
Width : 215 mm (8.5 inches)
Depth : 152 mm (6.0 inches)
Height : 145 mm (5.7 inches)
|
|
Printing
Width: 215 mm (8.5 inches)
Depth: 339 mm (13.4 inches)
Height: 261 mm (10.3 inches)
|
|
Printable area
|
Border printing: 3 mm margin for all sides of photo paper, and 17 mm margin on the bottom and 3 mm margin on the other sides for Photo Sticker.
Borderless printing: 0 mm margin
|
|
Paper tray capacity
|
Photo paper : 20 sheets
|
|
Photo sticker : one sheet
|
|
Weight
|
2.3 Kg (5.1 lb) without AC adapter and photo cartridge
|
Printer
|
|
AC adapter operated
|
|
Input
|
DC 20 v, 0.5 A
|
AC Adapter
|
Model
|
A381H
|
|
Input
|
AC 100-240 V, 50-60 Hz, 0.8-0.4 A 42-40 W
|
|
Output
|
DC 20 V, 1.68 A
|
Printer Operated by AC Adapter
|
|
AC 100-120 V Input
|
AC 220-240 V Input
|
|
Power consumption using AC adapter
|
Continuous printing
|
Approx. 10 W
|
Approx. 10 W
|
|
Low power mode
|
Approx. 4.0 W
|
Approx. 4.0 W
|
|
Power off mode
|
Approx. 0.2 W
|
Approx. 0.3 W
|
|
Input current using AC adapter (Continuous printing)
|
0.3 A (MAX 0.4 A)
|
0.15 A (MAX 0.3 A)
|
|
Temperature
|
Operation:
10 to 35 ˚C (50 to 95 ˚F)
Storage:
-20 to 60 ˚C (-4 to 140 ˚F)
1 month at 40 ˚C (104 ˚F)
|
|
Humidity
|
Operation:*
20 to 80% RH
|
* Without condensation
U.S. model:
|
EMC
|
FCC Part15 Subpart B Class B
CSA C108.8 Class B
|
European model:
|
EMC
|
EN55022 Class B
EN55024
EMC Directive 89/336/EEC
|
Australian model:
|
EMC
|
AS/NZS CISPR22 Class B
|
U.S. model:
|
Safety
|
UL60950-1
CSA C22.2 No.60950-1
|
|
EMC
|
FCC Part15 Subpart B Class B
CSA C108.8 Class B
|
European model:
|
Safety
|
Low Voltage Directive 72/23/EEC
EN60950-1
|
|
EMC
|
EMC Directive 89/336/EEC
EN55022 Class B
EN55024
EN61000-3-2
EN61000-3-3
|
Australian model:
|
Safety
|
AS/NZS 60950.1
|
|
EMC
|
AS/NZS CISPR22 Class B
|
|
Standard
|
Based on Universal Serial Bus Specifications Revision 2.0, Universal Serial Bus Device Class Definition for Printing Devices Version 1.1, Universal Serial Bus Mass Storage class Bulk-Only Transport Revision 1.0
|
|
Bit rate
|
480 Mbps (High speed device)
|
|
Data encoding
|
NRZI
|
|
Adaptable connector
|
USB Series B
|
|
Recommended cable length
|
Under 2 meters
|
|
Connectivity
|
Universal Serial Bus Specifications Revision 1.1*
Bit rate: 12 Mbps (Full speed device)
Connector type: USB Series A
Data Encoding: NRZI
Recommended cable length: Less than 1.8 meters
|
* Not all USB devices are supported. Contact your regional customer support for details.
| |
Top