 |
 For using your printer
For using the User’s Guide
To use this printer, you must have Windows XP Home Edition, Millennium Edition, 98 Second Edition, XP Professional x64 Edition, XP Professional, or 2000 Professional installed. For details on interfaces and operating systems, refer to the following table.
|
|
System
|
|
USB 2.0
|
Windows XP Home Edition, XP Professional x64 Edition, XP Professional, and 2000 Professional
(Operating systems upgraded from Windows Millennium Edition, 98, and 95 are not supported by the software.)
USB 2.0 Host Driver by Microsoft must be used.
|
|
USB 1.1
|
Windows XP Home Edition, XP Professional x64 Edition, XP Professional, Millennium Edition, 98 Second Edition, and 2000 Professional
(Operating systems upgraded from Windows 95 are not supported by the software.)
The USB interface must be used in full speed mode.
|
 |
Note: |
|
|
The driver for Windows Me and 98 SE is distributed on the internet. See your Start Here for details.
|
|
Check your Macintosh system to see which type of interface you are using. Then see the appropriate section for your system below.
|
|
System
|
|
USB 2.0
|
PowerPC-based Macintosh computers running Mac OS X 10.2.8 or later
Intel-based Macintosh computers with Rosetta
|
|
USB 1.1
|
PowerPC-based Macintosh computers running Mac OS X 10.2.8 or later
Intel-based Macintosh computers with Rosetta
|
For using the User’s Guide
|
For Windows
|
|
Browser
|
Microsoft Internet Explorer 4.0 or later (recommended)
|
|
For Macintosh
|
|
Browser
|
Microsoft Internet Explorer 4.0 or later (recommended)
|
| |
Top