 |
 |
|
||
|
||||
 |
||||
Temporarily Continuing Printing with One Ink Cartridge When the Other Is Expended
If one ink cartridge still contains ink when the other is expended, you can continue printing for a short time using the remaining cartridge. Print speed will however be slower, and the expended cartridge should be replaced as soon as possible. The following section described how to temporarily continue printing with one cartridge.
Note:|
The actual amount of time will vary depending on the usage conditions, images printed, print settings, and frequency of use.
This feature is not available for Mac OS X 10.4 or earlier.
|
For Windows
Follow the steps below to temporarily continue printing with one ink cartridge.
 |
When EPSON Status Monitor 3 tells you to cancel your print job, click Stop or Cancel Print to cancel your print job.
|
Note:|
If the error stating that an ink cartridge is expended originates with another computer on the network, you may need to cancel the print job at the printer.
|
 |
Load plain paper or envelopes.
|
 |
Access the printer settings.
|
 |
Click the Main tab, and then make suitable settings.
|
 |
Select plain papers or Envelope as the Paper Type setting.
|
 |
Click OK to close the printer settings window.
|
 |
Print your file.
|
 |
Epson Status Monitor 3 is displayed on your computer screen again. Click One Cartridge Print to print with one cartridge.
|
For Mac OS X
Note:|
This feature is not available for Mac OS X 10.4 or earlier.
|
Follow the steps below to temporarily continue printing with one ink cartridge.
|
If printing can not be resumed, click the printer icon in the Dock. If an error message is displayed prompting you to cancel the print job, click Delete and follow the steps below to reprint the document with black ink.
|
Note:|
If the error stating that an ink cartridge is expended originates with another computer on the network, you may need to cancel the print job at the printer.
|
|
Click through the following menus: System Preference, Print & Fax, your printer (in the Printers list box), Options & Supplies, and then Driver.
|
|
Make sure that On is selected for Permit temporary one cartridge printing and close the window.
|
|
Load plain paper or envelopes.
|
|
Access the Print dialog box.
|
|
Click the
 button to extend the dialog box. |
|
Select the printer you are using as the Printer setting, and then make suitable settings.
|
|
Select Print Settings from the pop-up menu.
|
 |
Select plain papers or Envelope as the Media Type setting.
|
 |
Click Print to close the Print dialog box.
|
|
|||||||||||||
| |||||||||||||
 (NPD4372-00 EN) |
