 |
 |
|
||
 |
||||
Transporting Your Printer
If you need to transport your printer some distance, carefully prepare and repack it as described below. Use the original box and packing materials, or a similar box that holds the printer snugly.
Caution:|
When storing or transporting the printer, avoid tilting it, placing it vertically, or turning it upside down; otherwise ink may leak.
Leave the ink cartridges installed. Removing the cartridges can dry out the print head and may prevent the printer from printing.
|
 |
Plug in the printer and turn it on. Wait until the ink cartridge holder returns to the home position, then close the printer cover.
|
 |
Turn off the printer and unplug its power cord.
|
 |
Disconnect the interface cable.
|
 |
Remove all paper from the sheet feeder.
|
 |
Open the printer cover. Secure the ink cartridge holder with tape, as shown below, then close the printer cover.
|
 |
Close the output tray and paper support. Secure both sides of the output tray to the outer case with tape as shown below.
|
 |
Attach the protective materials to both sides of the printer.
|
 |
Repack the printer and power cord in the original box.
|
Note:|
Keep the printer level during transport.
|