EPSON

Technical Specifications

Printer specifications

Paper path
Rear feeder, top entry
Capacity
12 mm (0.5 in.) *1 *2
*1 For Legal and User Defined sizes, load one sheet at a time.
*2 Paper with a weight of 64 to 90 g/m² (17 to 24 lb), or envelope with a weight of 75 to 90 g/m² (20 to 24 lb).

Paper

Note:
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot attest to the quality of any non-Epson brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
Poor quality paper may reduce print quality and cause paper jams or other problems. If you encounter problems, switch to a higher grade of paper.
Use paper under normal conditions:
Temperature 15 to 25 ˚C (59 to 77 ˚F)
Humidity 40 to 60% RH
Single sheets:
Size
A4 210 × 297 mm
10 × 15 cm (4 × 6 in.)
13 × 18 cm (5 × 7 in.)
A6 105 × 148 mm
A5 148 × 210 mm
B5 182 × 257 mm
9 × 13 cm (3.5 × 5 in.)
13 × 20 cm (5 × 8 in.)
20 × 25 cm (8 × 10 in.)
16:9 wide size (102 × 181 mm)
100 × 148 mm
Letter 8 1/2 × 11 in.
Legal 8 1/2 × 14 in.
Paper types
Plain paper or special paper distributed by Epson
Thickness
(for plain paper)
0.08 to 0.11 mm (0.003 to 0.004 in.)
Weight
(for plain paper)
64 g/m² (17 lb) to 90 g/m² (24 lb)
Envelopes:
Size
Envelope #10 4 1/8 × 9 1/2 in.
Envelope DL 110 × 220 mm
Envelope C6 114 × 162 mm
Paper types
Plain paper
Weight
75 g/m² (20 lb) to 90 g/m² (24 lb)

Printable area

Highlighted portions show printable area.
Single sheets:
Normal
Borderless
Envelopes:
 
Minimum margin
Media type
Single sheets
Envelopes
A
3.0 mm (0.12 in.)
3.0 mm (0.12 in.)
B
3.0 mm (0.12 in.)
5.0 mm (0.20 in.)
C
3.0 mm (0.12 in.)
20 mm (0.78 in.)
Note:
Depending on the type of paper, print quality may decline in the top and bottom areas of the printout, or the area may be smeared.

Scanner specifications

Note:
Specifications are subject to change without notice.
Scanner type
Flatbed color
Photoelectric device
CIS
Effective pixels
10,200 × 14,040 pixels at 1200 dpi
Scanning area may be restricted if resolution setting is large.
Document size
216 × 297 mm (8.5 × 11.7 inches) A4 or US letter size
Scanning resolution
1200 dpi (main scan)
2400 dpi (sub scan)
Output resolution
50 to 4800, 7200, and 9600 dpi
(50 to 4800 dpi in 1 dpi increments)
Image data
16 bits per pixel per color internal
8 bits per pixel per color external (maximum)
Light source
LED

Network Interface Specification

This option is available only with the SX420W/SX425W/NX420.
Wireless LAN
Standard:
IEEE 802.11b/g/n*
Security:
WEP (64/128bit),
WPA-PSK (TKIP/AES) WPA2 compliant
Frequency Band:
2.4 GHz
Communication Mode:
Ad hoc mode,
Infrastructure mode
*Complies with either IEEE 802.11b/g/n or IEEE 802.11b/g depending on location of purchase.

Memory card

Compatible memory cards
Memory Stick
Memory Stick PRO
Memory Stick Duo*
Memory Stick PRO Duo*
Memory Stick PRO-HG Duo*
Memory Stick Micro*
MagicGate Memory Stick
MagicGate Memory Stick Duo*
SDHC
SD
MultiMediaCard
MMCplus
MMCmobile*
MMCmicro*
miniSDHC*
miniSD*
microSDHC*
microSD*
xD-Picture Card
xD-Picture Card Type M
xD-Picture Card Type M +
xD-Picture Card Type H
Media format DCF
DCF (Design rule for Camera File system) version 1.0 or 2.0 compliant
All card types standard version compliant.
Voltage Requirements
3.3 v
Maximum current is 500 mA
*  Adapter required.

Photo data specifications

File format
JPEG with the Exif Version 2.21 standard
Image size
80 × 80 pixels to 9200 × 9200 pixels
Number of files
Up to 999

Mechanical

 
SX420W
SX425W
NX420
SX218
TX220
520
NX220
Dimensions
Storage
Width: 450 mm (17.7 inches)
Depth: 342 mm (13.5 inches)
Height: 182 mm (7.2 inches)
Printing
Width: 450 mm (17.7 inches)
Depth: 541 mm (21.3 inches)
Height: 298 mm (11.7 inches)
Weight
Approx. 5.6 kg (12.3 lb) without the ink cartridges and the power code
Approx. 5.7 kg (12.6 lb) without the ink cartridges and the power code

Electrical

SX420W/SX425W/NX420
 
100-120 V Model
220-240 V Model
Input voltage range
90 to 132 V
198 to 264 V
Rated frequency range
50 to 60 Hz
Input frequency range
49.5 to 60.5 Hz
Rated current
0.5 A
0.2 A
Power consumption
Standalone copying
Approx. 13 W (ISO/IEC24712)
Approx. 13 W (ISO/IEC24712)
Ready mode
Approx. 6.0 W
Approx. 6.0 W
Sleep mode
Approx. 4.0 W
Approx. 4.0 W
Power off
Approx. 0.2 W
Approx. 0.3 W
SX218/TX220/520/NX220
 
100-120 V Model
220-240 V Model
Input voltage range
90 to 132 V
198 to 264 V
Rated frequency range
50 to 60 Hz
Input frequency range
49.5 to 60.5 Hz
Rated current
0.6 A
0.3 A
Power consumption
Standalone copying
Approx. 13 W (ISO/IEC24712)
Approx. 13 W (ISO/IEC24712)
Ready mode
Approx. 5.0 W
Approx. 5.0 W
Sleep mode
Approx. 2.5 W
Approx. 2.5 W
Power off
Approx. 0.2 W
Approx. 0.4 W
Note:
Check the label on the back of the printer for its voltage.

Environmental

Temperature
Operation:
10 to 35 ˚C (50 to 95 ˚F)
Storage:
-20 to 40 ˚C (-4 to 104 ˚F)
1 month at 40 ˚C (104 ˚F)
Humidity
Operation:*
20 to 80% RH
Storage:* 5 to 85% RH
* Without condensation

Standards and approvals

SX218/TX220/520/NX220
U.S. model:
Safety
UL60950-1
CAN/CSA-C22.2 No.60950-1
EMC
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B
European model:
Low voltage directive 2006/95/EC
EN60950-1
EMC directive 2004/108/EC
EN55022 Class B
EN61000-3-2
EN61000-3-3
EN55024
Australian model:
EMC
AS/NZS CISPR22 Class B
SX420W/SX425W/NX420
U.S. model:
Safety
UL60950-1
CAN/CSA-C22.2 No.60950-1
EMC
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B
This equipment contains the following wireless module.
Manufacture: Marvell Semiconductor Inc.
Type: SP88W8786-MD0-2C2T00
This product conforms to Part 15 of the FCC Rules and RSS-210 of the IC Rules. Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
European model:
Low voltage directive 2006/95/EC
EN60950-1
EMC directive 2004/108/EC
EN55022 Class B
EN61000-3-2
EN61000-3-3
EN55024
R&TTE directive 1999/5/EC
EN300 328
EN301 489-1
EN301 489-17
EN60950-1
For European users:
We, Seiko Epson Corporation, hereby declare that the equipment Model, C353A is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
For use only in Ireland, UK, Austria, Germany, Liechtenstein, Switzerland, France, Belgium, Luxemburg, Netherlands, Italy, Portugal, Spain, Denmark, Finland, Norway, Sweden, Iceland, Cyprus, Greece, Slovenia, Bulgaria, Czech, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia, and Malta.
Only indoor operation is permitted in France.
If used outside of own premises, general authorization is required in Italy.
Epson can not accept responsibility for any failure to satisfy the protection requirements resulting a non-recommended modification of the products.
Australian model:
EMC
AS/NZS CISPR22 Class B
Epson hereby declares that the equipment Model, C353A is in compliance with the essential requirements and other relevant provisions of AS/NZS4771. Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product.

Interface

USB 2.0 Hi-Speed (Device Class for computers)