EPSON

Solving Network Problems

Network problems may be caused by the network environment, computer, and printer. To help resolve problems, you can check and confirm the network status using the following methods.
Note:
When changes are made to the network settings, it takes about 30 to 60 seconds to reflect the setup changes.
(The time until the changes are reflected varies depending on the setting method, wireless router, access point, and so on.)

Printing a network connection check report

If you make changes to the network settings, such as changing the network environment, you can check the network connection and print a network connection check report.
If the network connection fails, the check report helps you to find a solution to the problem.
For more details about how to check the network connection and print the check report, refer to the documentation of your printer.
Note:
This feature is not available for printers that do not have an LCD panel.
For information on using the network connection check report, click the following link.
This feature is not available for all printers or the feature may not be enabled.
../p_body/panel/wizard/external/nwchk.htm

Displaying the network status and printing a network status sheet

You can display the network status on the LCD and print a network status sheet. In the network status, you can confirm information such as the connection method, connection speed (transmission speed), IP address, security method, and Epson Connect status.
If your printer has an LCD panel, you can display simplified status information and print detailed status information.
If your printer does not have an LCD panel, you can print detailed status information using the buttons on the control panel.
For more details about displaying the network status and printing the network status sheet, refer to the documentation of your printer.

Checking the communication using the Ping command

If you cannot access the Web page embedded in the printer, the printer does not respond even though you sent a print job to the printer, or other problems occur, you can use this feature to confirm whether communication is established between the computer and the printer.
Before using the Ping command, you need to confirm the IP addresses set on the computer and printer.
For more details about operating the computer, refer to Ping command.

Disabling and initializing the Wi-Fi settings

Network problems may be resolved by disabling or initializing the Wi-Fi settings, and then making the settings again.
These operations vary depending on the model. For more details, refer to the documentation of your printer.
Note:
Before you disable or initialize the Wi-Fi settings, it is recommended that you confirm and write down the SSID and password first.
Disabling the Wi-Fi function:
If your printer has an LCD panel, you can disable the Wi-Fi function using the LCD panel.
If your printer does not have an LCD panel, you can disable the Wi-Fi function by connecting an Ethernet cable that is connected to an active network.
If your printer does not have an LCD panel or an Ethernet interface, you can disable the Wi-Fi function by initializing the network settings using the buttons on the control panel.
Note:
The Ethernet function is enabled when the Wi-Fi function is disabled.
Initializing the network settings:
If your printer has an LCD panel, you can initialize the network settings using the LCD panel.
If your printer does not have an LCD panel, you can initialize the network settings using the buttons on the control panel.
Note:
If you initialize the network settings, the Epson Connect settings and the settings for the network print services provided by other companies will be initialized too.

Updating printer firmware

Network problems may be resolved by updating the printer firmware. Confirm that you are using the latest version of the printer firmware.
Use a Web browser to open a Web page embedded in the printer, and then carry out the firmware update in the top menu.
Note:
This feature is not available for all printers or may not be enabled.
For more details about opening a Web page embedded in the printer, refer to Web Page Embedded in the Printer.

Ping command

In the TCP/IP network environment, confirm the IP addresses set on the computer and printer, then check whether communication is established between the computer and printer.

Confirming in Windows 7/Vista/XP

Check the printer’s IP address.
The IP address can be checked on a network status sheet, check report, or LCD screen.
Click the Start button or start, All Programs or Programs, Accessories, and then Command Prompt.
Type ‘ping’, a space, and ‘<the printer’s IP address>’, then press the Enter key.
If a communication is established, Reply from <the printer’s IP address> is displayed.
If communication is not established, Destination host unreachable or Request timed out is displayed. Check the device’s network settings on the computer.

Confirming in Mac OS X

Confirm the printer’s IP address.
The IP address can be checked on a network status sheet. See Displaying the network status and printing a network status sheet.
Double-click Macintosh HD, Applications, Utilities, and then Network Utility.
Click the Ping tab.
Enter the printer’s IP address in the network address field.
Click Ping.
If communication is established, all signals are returned and 0% packet loss is displayed.
If communication is not established, no signal is returned, and 100% packet loss is displayed. Check the device’s network settings on the computer.