* sleep mode: When it passes 4 minutes and 30 seconds in the following condition, the printer enters a sleep mode.
- Not paused and no error
- There is no data in input buffer
 |
 |
|
||
 |
||||
Printer Specifications
Mechanical
|
Printing method:
|
24-pin impact dot matrix
|
|
|
Printing speed:
|
High speed draft
|
300 cps at 10 cpi
360 cps at 12 cpi |
|
Draft
|
225 cps at 10 cpi
270 cps at 12 cpi 337 cps at 15 cpi |
|
|
Draft condensed
|
192 cps at 17 cpi
225 cps at 20 cpi |
|
|
LQ
|
75 cps at 10 cpi
90cps at 12 cpi 112 cps at 15 cpi |
|
|
LQ condensed
|
128 cps at 17 cpi
150 cps at 20 cpi |
|
|
Printing direction:
|
Bidirectional logic seeking for text and graphics printing. Unidirectional text or graphics printing can be selected using software commands.
|
|
|
Line spacing:
|
1/6-inch or programmable in 1/360-inch increments
|
|
|
Printable columns:
|
50 columns (at 10 cpi)
|
|
|
Resolution:
|
360 × 180 dpi maximum
|
|
|
Feeding method:
|
Friction feed (rear paper entry)
Push tractor feed (rear paper entry) |
|
|
Feeder:
|
Rear push tractor
Roll paper holder (Optional) |
|
|
Paper feed speed:
|
Continuous
|
53 mm/second at 1/6-inch line spacing
(3.6 inches/second) |
|
Reliability:
|
Total print volume
|
20 million lines
(except print head) MTBF 10,000 POH (25% duty) |
|
Print head life
|
200 million strokes per wire
|
|
|
Dimensions
|
Printer only:
Height Width Depth |
153 mm (6.0 inches) 275 mm (10.8 inches) (including the knob) 240 mm (9.4 inches) |
|
With optional roll paper holder:
Height Width Depth |
247 mm (9.7 inches) 275 mm (10.8 inches) (including the knob) 282 mm (11.1 inches) |
|
|
With optional printer stand:
Height Width Depth |
254 mm (10.0 inches) 279 mm (11.0 inches) (including the knob) 249 mm (9.8 inches) |
|
|
With optional roll paper holder and printer stand:
Height Width Depth |
348 mm (13.7 inches) 279 mm (11.0 inches) (including the knob) 286 mm (11.3 inches) |
|
|
Weight:
|
approx. 3.3 kg (7.3 lb)
|
|
|
Ribbon:
|
Black ribbon cartridge (S015621)
Black ribbon pack (S010086) |
|
|
Ribbon life
(LQ, 10 cpi, 48 dots/ character)
|
Black ribbon
|
3 million characters
|
|
Acoustic noise:
|
Approx. 54 dB (A) (ISO 7779 pattern)
|
|
Electronic
|
Interfaces:
|
One standard bidirectional, 8-bit, parallel interface with IEEE-1284 nibble mode support, and one USB (ver2.0) interface
|
|
Buffer:
|
64KB
|
|
Built-in fonts:
|
Bitmap fonts:
EPSON Draft 10, 12, 15 cpi
EPSON Roman 10, 12, 15 cpi, proportional EPSON Sans Serif 10, 12, 15 cpi, proportional EPSON Courier 10, 12, 15 cpi EPSON Prestige 10, 12 cpi EPSON Script 10 cpi EPSON OCR-B 10 cpi EPSON Orator 10 cpi EPSON Orator-S 10 cpi EPSON Script C proportional |
|
Scalable fonts:
EPSON Roman 10.5, 8-32 pt (every 2 pt)
EPSON Sans Serif 10.5, 8-32 pt (every 2 pt) EPSON Roman T 10.5, 8-32 pt (every 2 pt) EPSON Sans Serif H 10.5, 8-32 pt (every 2 pt) |
|
|
Indian fonts (14 pt and 10.5 pt, LQ and Draft):
CDAC Devanagari Proportional
CDAC Bengali Proportional CDAC Tamil Proportional CDAC Telugu Proportional CDAC Assamese Proportional CDAC Oriya Proportional CDAC Kannada Proportional CDAC Malayalam Proportional CDAC Gujarati Proportional CDAC Punjabi Proportional |
|
|
Barcode fonts:
EAN-13, EAN-8, Interleaved 2 of 5, UPC-A, UPC-E, Code 39, Code 128, POSTNET
|
|
|
Character tables:
|
One italic, five Indian table and 13 graphics character tables:
Italic table, PC437 (US, Standard Europe), PC850 (Multilingual), PC860 (Portuguese), PC861 (Icelandic), PC865 (Nordic), PC863 (French-Canadian), BRASCII, Abicomp, ISO Latin 1, Roman 8, PC858, ISO 8859-15, ISCII, PC-ISCII, EA-ISCII, TAB-Tamil99, TAM-Tamil99
|
|
Character sets:
|
14 international character sets and one legal character set:
USA, France, Germany, UK, Denmark I, Sweden, Italy, Spain I, Japan, Norway, Denmark II, Spain II, Latin America, Korea, Legal
Letter 7 sets can be selected only with the ESC R command. |
Electrical
|
220 to 240 V Model
|
||
|
Input voltage range
|
AC 198 to 264 V
|
|
|
Rated frequency range
|
50 to 60 Hz
|
|
|
Input frequency range
|
49.5 to 60.5 Hz
|
|
|
Rated current
|
0.3 A (maximum 0.9 A depending on the character type)
|
|
|
Power consumption
|
Approx. 20 W (Original test pattern)
Approx. 2.3 W in sleep mode* 0 W in power off mode |
|
Environmental
|
Temperature
(without condensation) |
Humidity
(without condensation) |
|
|
Operation
|
5 to 35 ˚C (41 to 95 ˚F)
|
10 to 80% RH
|
|
Storage
|
-30 to 60 ˚C (-22 to 140 ˚F)
|
0 to 85% RH
|
Paper
Note:|
Use recycled paper only under normal temperature and humidity conditions, as follows:
Temperature: 15 to 25 ˚C (59 to 77 ˚F) Humidity: 30 to 60 % RH Do not load paper that has been folded or is damaged, wrinkled, or curled.
|
Continuous paper (standard and multipart): rear entry
|
Width
|
101.6 to 152.4 mm (4.0 to 6.0 inches)
|
|
Length (one page)
|
101.6 to 558.8 mm (4.0 to 22.0 inches)
|
|
Copies
|
1 original + up to 2copies
|
|
Thickness
|
0.065 to 0.25 mm (0.0025 to 0.0098 inch)
|
|
Weight
(not multipart) |
52 to 82 g/m² (14 to 22 lb)
|
|
Weight
(one sheet of multipart) |
40 to 58 g/m² (12 to 15 lb)
|
|
Binding
|
Spot glued or crimp bound on both sides
|
Roll paper: rear entry with optional roll paper holder
|
Width
|
101.6 to 127 mm (4.0 to 5.0 inches)
|
|
Thickness
|
0.065 to 0.09 mm (0.0025 to 0.0035 inch)
|
|
Weight
|
52 to 82 g/m² (14 to 22 lb)
|
Recommended printable area
Note:|
For best results, print within the recommended printable area. The printer may not print outside this area.
|
Continuous paper:
|
A
|
The minimum top and bottom margins above and below the perforation are 4.2 mm (0.17 inch) each.
|
|
B
|
The minimum left and right margins are 13 mm (0.51 inch) each.
The maximum paper width is 152.4 mm (6.0 inches) and the maximum printable width is 127.0 mm (5.0 inches).
|
Roll paper:
|
A
|
The minimum top margin is 4.2 mm (0.17 inch).
|
|
B
|
The minimum left margin is 3.0 mm (0.12 inch).
The minimum right margin is 3.0 mm (0.12 inch).
The maximum printable width is 121.0 mm (4.8 inches).
|