EPSON

Placing Documents on the Document Glass

Important:
Do not place heavy objects on the document glass and do not press the glass with too much force.
Note:
The illustrations used in this guide are of the Auto Document Feeder scanner.
Open the document cover.
Place your document face-down on the document glass. Make sure the top of the document is against the left edge and centered on the arrow mark.
Note:
If you are scanning multiple documents at once, position each photo at least 20 mm (0.8 inch) apart from the others.
Close the document cover gently so that your original does not move.
Important:
Make sure you use the handle when opening or closing the ADF.
Note:
Do not leave photos on the document glass for an extended period of time as they may stick to the glass.
Always keep the document glass clean.
You can place documents up to 15 mm (0.6 inch) thick.