Reference Guide

Index	Search	Glossary

Contents	Help

How To / Replacing Consumable Products

Replacement Messages

When you see the following messages on the LCD panel or the window of EPSON Status Monitor 3, replace the appropriate consumable products. You can continue to print for a short time after a message appears, but EPSON recommends early replacement to maintain print quality and extend the life of your printer.

Control panel message	Description
Toner Low	The amount of remaining toner in the imaging cartridge is low.

Note:

To clear these messages, select Clear All Warnings in Reset Menu.

When the Toner out setting in the Setup Menu on the control panel is set to Stop, the following occurs.

If you continue to use the printer without replacing consumable products and a consumable product reaches the end of its service life, the printer stops printing and displays the following messages on the LCD panel or the window of EPSON Status Monitor 3. When this happens, the printer cannot resume printing until you replace the depleted consumable products.

Control panel message	Description
Replace Toner	The imaging cartridge is empty.

[Top]