Administrator's Guide

Index Search Contents Help

Introduction

Functions of the Internal Print Server

• Your printer has a built-in Ethernet interface, which is called Internal Print Server in this manual.

• The Internal Print Server automatically selects either 10Base-T or 100Base-TX when it is connected to a network.

• An IP address is automatically assigned to the Internal Print Server even if there is no DHCP server on your network.

• The Internal Print Server is equipped with SSDP (Simple Service Discovery Protocol) to support Universal Plug and Play.

• The Internal Print Server supports multiple protocols, such as TCP/IP, NetWare, NetBEUI, AppleTalk, IPP, and SNMP.

• Because the Internal Print Server supports Printer MIB, SNMP settings such as SNMP community, IP trap, and IPX trap settings become available with EpsonNet WinAssist and WebAssist.

[Top]

Previous

Next