EPSON

Technical Specifications

Paper

Note:
Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot attest to the quality of any non-Epson brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs.
Poor quality paper may reduce print quality and cause paper jams or other problems. If you encounter problems, switch to a higher grade of paper.
Use paper under normal conditions:
Temperature 15 to 25 ˚C (59 to 77 ˚F)
Humidity 40 to 60% RH
Single sheets:
Size
A4 210 × 297 mm
10 × 15 cm (4 × 6 in.)
13 × 18 cm (5 × 7 in.)
A6 105 × 148 mm
A5 148 × 210 mm
B5 182 × 257 mm
9 × 13 cm (3.5 × 5 in.)
13 × 20 cm (5 × 8 in.)
20 × 25 cm (8 × 10 in.)
16:9 wide size (102 × 181 mm)
Letter 8 1/2 × 11 in.
Legal 8 1/2 × 14 in.
Paper types
Plain bond paper or special paper distributed by Epson
Thickness
(for plain bond paper)
0.08 to 0.11 mm (0.003 to 0.004 in.)
Weight
(for plain bond paper)
64 g/m² (17 lb) to 90 g/m² (24 lb)
Envelopes:
Size
Envelope #10 4 1/8 × 9 1/2 in.
Envelope DL 110 × 220 mm
Envelope C6 114 × 162 mm
Paper types
Plain bond paper
Weight
75 g/m² (20 lb) to 90 g/m² (24 lb)

Printable area

Highlighted sections show the printable area.
Single sheets:
Normal
Borderless
Envelopes:
 
Minimum margin
Media type
Single sheets
Envelopes
A
3.0 mm (0.12 in.)
3.0 mm (0.12 in.)
B
3.0 mm (0.12 in.)
5.0 mm (0.20 in.)
C
3.0 mm (0.12 in.)
20 mm (0.78 in.)
Note:
Depending on the type of paper, print quality may decline in the top and bottom areas of the printout, or the area may be smeared.

Ink cartridges

Color
Yellow, Magenta, Cyan, Black
Cartridge life
Use within 6 months of opening the package.
Temperature
Storage:
-20 to 40 ˚C (-4 to 104 ˚F)
1 month at 40 ˚C (104 ˚F)
Freezing:*
-12˚C (10.4˚F)
* Ink thaws and is usable after approximately 3 hours at 25 ˚C (77 ˚F).
Caution:
Epson recommends the use of genuine Epson ink cartridges. Other products not manufactured by Epson may cause damage that is not covered by Epson’s warranties, and under certain circumstances, may cause erratic printer behavior.
Use the ink cartridge before the date printed on its package.
Note:
The ink cartridges packaged with your printer are partly used during initial setup. In order to produce high quality printouts, the print head in your printer will be fully charged with ink. This one-off process consumes a quantity of ink and therefore these cartridges print fewer pages compared to subsequent ink cartridges.
Quoted yields may vary depending on the images that you are printing, the paper type that you are using, the frequency of your prints and environmental conditions such as temperature.
To ensure you receive premium print quality and to help protect your print head, a variable ink safety reserve remains in the cartridge when your printer indicates to replace the cartridge. The yields quoted for you do not include this reserve.

Network

Wireless LAN
Standard:
IEEE 802.11b/g
Security:
WEP (64/128bit),
WPA-PSK (TKIP/AES) WPA2 compliant
Frequency Band:
2.4 GHz
Communication Mode:
Ad hoc mode,
Infrastructure mode
Wired LAN
Standard:
Ethernet 100BASE-TX/10 BASE-T

Mechanical

Paper path
Sheet feeder, top entry
Sheet feeder capacity
About 120 sheets at 90 g/m² (24 lb) paper*
Dimensions
Storage
Width: 435 mm (17.1 inches)
Depth: 250 mm (9.8 inches)
Height: 161 mm (6.3 inches)
Printing
Width: 435 mm (17.1 inches)
Depth: 555 mm (21.9 inches)
Height: 318 mm (12.5 inches)
Weight
Approx. 4.0 kg (8.8 lb) without accessories.
* For Legal and User Defined sizes, load one sheet at a time.

Electrical

 
100-120 V Model
220-240 V Model
Input voltage range
90 to 132 V
198 to 264 V
Rated frequency range
50 to 60 Hz
Input frequency range
49.5 to 60.5 Hz
Rated current
0.6 A
0.3 A
Power consumption
Printing
Approx. 16 W (ISO/IEC24712)
Approx. 16 W (ISO/IEC24712)
Ready mode
Approx. 5.5 W
Approx. 5.5 W
Sleep mode
Approx. 4.5 W
Approx. 4.5 W
Power off
Approx. 0.2 W
Approx. 0.3 W
Note:
Check the label on the back of the printer for its voltage.

Environmental

Temperature
Operation:
10 to 35 ˚C (50 to 95 ˚F)
Storage:
-20 to 40 ˚C (-4 to 104 ˚F)
1 month at 40 ˚C (104 ˚F)
Humidity
Operation:*
20 to 80% RH
Storage:* 5 to 85% RH
* Without condensation

Standards and approvals

U.S. model:
Safety
UL60950-1
CAN/CSA-C22.2 No.60950-1
EMC
FCC Part 15 Subpart B Class B
CAN/CSA-CEI/IEC CISPR 22 Class B
This equipment contains the following wireless module.
Manufacture: Askey Computer Corporation
Type: WLU3072-D69(RoHS)
This product conforms to Part 15 of the FCC Rules and RSS-210 of the IC Rules. Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation of the device.
To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing.
European model:
Low voltage directive 2006/95/EC
EN60950-1
EMC directive 2004/108/EC
EN55022 Class B
EN61000-3-2
EN61000-3-3
EN55024
R&TTE directive 1999/5/EC
EN300 328
EN301 489-1
EN301 489-17
EN60950-1
For European users:
We, SEIKO EPSON Corporation, hereby declare that this equipment Model B422A is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
For use only in;
Ireland, UK, Austria, Germany, Switzerland, France, Belgium, Luxemburg, Netherlands, Italy, Portugal, Spain, Denmark, Finland, Norway, Sweden, Greece, Slovenia, Bulgaria, Czech, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia.
Only indoor operation is permitted in France.
If used outside of own premises, general authorization is required in Italy.
EPSON cannot accept responsibility for any failure to satisfy the protection requirements resulting a non-recommended modification of the products.
Australian model:
EMC
AS/NZS CISPR22 Class B
Epson hereby declares that this product, Model B422A, is in compliance with the essential requirements and other relevant provisions of AS/NZS4771. Epson cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product.

Interface

USB 2.0 Hi-Speed (Device Class for computers)