Printer Parts and Control Panel Functions

a.

Paper support: Supports the paper loaded in the sheet feeder.

b.

Sheet feeder: Holds your paper and feeds it for printing.

c.

Paper feed roller lever: Push this lever forward to release and remove any jammed paper.

d.

Printer cover: Covers the printing mechanism. Open only to clear paper jams or to install or replace ink cartridges.

e.

Output tray: Holds the ejected paper.

f.

Edge guide: Holds your paper straight in the sheet feeder. Move the edge guide to the edge of your paper.

a.

USB connector: Connects the USB cable from your computer to the printer.

a.

Ink cartridge holder: Holds the ink cartridges.

b.

Print head: Prints ink on your paper.

c.

Control panel: Use the buttons and monitor the lights to control your printer. See the next section for details.

power

Press to turn the printer on and off.

stop/maintenance

Press to load or eject paper.

Press to resume printing after a paper out error or multiple page feed error.

Press to cancel printing during a print job.

When an expended ink cartridge is detected, press to move the print head to the ink cartridge replacement position.

After ink cartridge replacement, press to return the print head to its home position.

When the  error light is off, press and hold for 3 seconds to clean the print head.

power

On when the printer is on.

Flashes when the printer is receiving data, printing, replacing an ink cartridge, charging ink, or cleaning the print head.

error

On when an ink cartridge is expended.

Flashes when an ink cartridge is nearly expended.